Undergraduate Programmes (Engineering & Petroleum Geoscience) For International Student PDF Print E-mail

Bachelor of Engineering (Honours)


Chemical

The programme focuses on the application of engineering principles to the design, construction and operation of industrial processing plants that deals with chemicals, petrochemicals, pharmaceutical, semiconductor and food processing. Students will apply in-depth technical knowledge for problem identification, interpret, evaluate and improve system performance of a plant operation.

Click here for more information on the programme.


Civil

This programme will involve areas in design, construction and maintenance of infrastructures including buildings, roads, bridges, dams, water and wastewater treatment plant, oil and gas production facilities. Courses such as transportation, environmental, geotechnical, structural and wastewater will be expose to the students in providing them with a depth technical competence in any specific civil engineering discipline.

Click here for more information on the programme.

Electrical and Electronics

The Bachelor of Engineering (Honours) Electrical & Electronic Engineering programme at Universiti Teknologi PETRONAS emphasises a strong foundation in physics, mathematics, and chemistry, followed by a thorough coverage of basic electrical and electronic engineering courses such as circuit theory, analogue electronics, digital electronics, microprocessor, and signal & systems. At higher levels, students are exposed to data and computer networking, digital signal processing, VLSI system design, control theory, communication systems, and power electronics. At the final year, students have the opportunity to major in one of these selected areas of their interest:


• Microelectronics 
• Power Systems Engineering 
• Communication Systems 
• Instrumentation and Control

• Embedded Systems


Click here for more information on the programme.

Mechanical

The focus of this programme is on the application of engineering principles to the design, development and manufacturing of mechanical devices and systems. The curriculum will teach the students to be creative and innovative in the design analysis and operation management of mechanical design systems.

Click here for more information on the programme.

Petroleum

The programme is intended to prepare students for the petroleum industry particularly in dealing with drilling, production, reservoir engineering and transportation of oil gas and other subsurface resources. Later the student will be equip with the knowledge on the exploration and production activities of petroleum at the upstream end of the energy sector.

Click here for more information on the programme.



Entry Requirement


A-Level or equivalent

-    Pass A-Level with at least Grade C in Mathematics, Physics and Chemistry;

OR

International Baccalaureate (IB)

-    Pass International Baccalaureate (IB) with at least Point 4 in Mathematics, Physics and Chemistry;

 

OR

Foundation in Relevant Field from Universiti Teknologi PETRONAS

-    Pass Foundation Program in relevant field from Universiti Teknologi PETRONAS with at least a final CGPA of 2.00/4.00;

 

OR

Foundation in Relevant Field from a Recognized Institution

-    Pass Foundation Program in relevant field from an Institution which is recognized by the Malaysian Government with at least a final CGPA of 3.00/4.00;

 

OR

 

Diploma in Relevant Field from a Recognized Institution

-    Pass a Diploma Program in relevant field from an Institution which is recognized by the Malaysian Government with at least a final CGPA of 3.00 / 4.00;

OR

 

Australian Matriculation Program

-    Pass Australian Matriculation Program with at least Grade C in Mathematics, Specialised Mathematics, Physics and Chemistry:

 

  • Year 12 Certificate, Australian Capital Territory;
  • Higher School Certificate (HSC), New South Wales;
  • Northern Territory Certificate Education (NTSE);
  • Queensland Senior Certificate;
  • South Australian Certificate of Education;
  • Tasmanian Certificate of Education (TSE);
  • Victorian Certificate of Education (VCE);
  • Western Australia Certificate of Education (WACE);

OR

 

Other equivelent qualification recornised by the Malaysian Government;

 

AND

 

Additional Requirement for International Students:

  • Application must be made using the final examination semester results.
  • English requirement - IELTS score of 6.0 or TOEFL paper base score 550 or equivalent.
  • English Placement Test (EPT) will be conducted to assess the applicant’s level of English proficiency.In some cases, student will be required to enrol for Intensive English Class Course at UTP before proceeding to Undergraduate Programme

 


Fee



Payee : INSTITUTE OF TECHNOLOGY PETRONAS SDN BHD
Bank Account number : 8004852703
Banker’s name : CIMB Berhad
Swift code : CIBBMYKL
Banker’s address : 20, Jalan Pos Baru, 31000 Batu Gajah, Perak, Malaysia

 

Undergraduate – Engineering Programme (Estimated Amount)

Full Amount For The Whole 4 years Duration

Description

Unit

Cost

RM

Annual fees

4

2,676.00

10,704.00

Insurance - per annum

4

530.00

2,120.00

Tuition Fees - credits hour

145

485.00

70,325.00

Accommodation - per week

192

52.50

10,080.00

Total (RM)

93,229.00


Undergraduate – Petroleum Geoscience (Estimated Amount)

Full Amount For The Whole 4 years Duration

Description

Unit

Cost

RM

Annual fees

4

3,976.00

15,904.00

Insurance - per annum

4

530.00

2,120.00

Tuition Fees - credits hour

140

485.00

67,900.00

Accommodation - per week

192

52.50

10,080.00

Total (RM)

96,004.00

 

Note:

 

a) Medical check-up is chargeable separately, at (RM250.00 + RM15.00 (GST) = RM265.00) (approximately) per person. The medical check-up to be conducted one time at UTP, upon registration.


b) The tuition fee is chargeable based on the number of credit hours registered for each semester.  The cost for a credit hour is stated below :

 

  • Intensive English Course - RM240/credit hour
  • Undergraduate Programmes - RM485/credit hour

 

c) Total Credit Hours to be completed throughout the academic programme are as stated below:

 

  • Intensive English Course - 12 credit hours (One Semester Programme). 24 credit hours (Two semester programme)
  • Undergraduate program in Engineering  - 145 credit hours (Eight semesters)
  • Undergraduate program in Petroleum Geoscience - 140 credit hours (Eight semesters)
  • Undergraduate program in Technology  (Information and Communication Technology /Business Information System)- 127 credit hours (7 semesters)



Period


Quantum of Charges


Before Course Registration


Charge 2% from the Academic and Annual Fee for one (1) semester


After Course Registration until Add/Drop Period


Charge 16% from the Academic and Annual Fee for one (1) semester


After Add/Drop Period


Charge 100% from the Academic and Annual Fee for one (1) semester


***Note

All fees are subject to changes (the University reserves the right to change the tuition fees without prior notice). 



How to Apply

 

  • Application is open throughout the year. To enroll into the next intake session (May and September), completed  application form must reach us before the deadline as stated below:

INTAKE


APPLICATION SUBMISSION DEADLINES 
(FOR INTERNATIONAL STUDENTS)

MAY 2016

30 November 2015

SEPTEMBER 2016 31 March 2016

 

  • Please click on the following link for the procedure and to make your application.


How to Apply/ Application Form


FAQs

 

IMPORTANT DATES

Intake Sessions

May and September
Deadline for Submission of Application Form Application is open throughout the year. To apply for admission into our intake sessions (May and September), application form must reach us before the given deadline. Allocation of placement in the next intake will be subjected to availability of placement.
Application Deadlines

INTAKE

APPLICATION SUBMISSION DEADLINES
(FOR INTERNATIONAL STUDENTS)

MAY 2016

30 November 2015

SEPTEMBER 2016 31 March 2016


FREQUENTLY ASKED QUESTIONS

1.

Where could we get information about intake and on other admission matters?

Please contact +605 368 8406/8153/8407/8156 OR email us at nursyafiqah.sharin@petronas.com.my OR miqbal.ahmadnasir@petronas.com.my OR  fatahn@petronas.com.my OR ikhwan.r@petronas.com.my OR ahmad_zamdi@petronas.com.my OR kindly visit UTP website at www.utp.edu.my

2.

What are the entry qualifications for admission into Universiti Teknologi PETRONAS ?

a) Undergraduate in Engineering

A-Level or equivalent

Pass A-Level with at least Grade C (60% and above) in Mathematics, Physics and Chemistry.

b) Undergraduate in Technology

A-Level or equivalent

Pass A-Level with at least Grade C (60% and above) in Mathematics AND any two (2) non-language subjects.

* Note

  • Applicants who failed to meet our academic requirements will not be considered for admission placement at our university.
  • Besides the academic requirements mentioned above,  applicants are also required to fulfill our English requirements of IELTS score of 6.0 or TOEFL paper-based score of 550 or IBT of 80.   Applicants must enclose their English certification (IELTS or TOEFL) together with their application form.
  • English Placement Test (EPT) will be conducted to assess the applicant’s level of English proficiency.In some cases, student will be required to enrol for Intensive English Class Course at UTP before proceeding to Undergraduate Programme

3.

When is the date of commencement for the next academic session?

Successful applicants will be notified on the date of the commencement of their respective academic session through their Offer Letters.

4.

What is the method of application?

Applicants must fill-up the *application form and send  it together with the required documents to UTP via post or email. Applicants are advised to read the procedure of application on How to Apply/ Application Form before applyingYour application will only be processed once you have submitted the completed application form together with the supporting documents.

5.

When is the closing date of application?

Application is open throughout the year. To apply for admission into our intake sessions (May and September), application form must reach us before the given deadline. Allocation of placement in the next intake will be subjected to availability of placement.

6.

I have submitted my application. What is the next process?

If you are shortlisted for our programme, you will be required to attend our assessment session of which the date and venue of the said assessment will be made known later. Only successful candidates will be issued with their respective Offer Letters.

7.

What are the courses offered in Universiti Teknologi PETRONAS for Undergraduate Programmes?

 

Engineering Programmes & Petroleum Geoscience

 

  • Chemical Engineering
  • Civil Engineering
  • Electrical and Electronic Engineering
  • Mechanical Engineering
  • Petroleum Engineering
  • Petroleum Geoscience

8.

How long does it take to complete a programme at UTP?


A-level or equivalent qualification.

 

-

Undergraduate Programme

  • Engineering and Petroleum Geoscience -  4 years (8 semesters)

Diploma or equivalent qualification.

 


Undergraduate Programme

  • Engineering and Petroleum Geoscience -  subject to credit transfer (maximum of 30 credit hours)

9.

When are we supposed to pay the tuition fee?

The registration fees stated below need to be settled by new students before OR on the day of the registration date. Students will be given until 2 weeks before the Final Semester Examination begins to make payment on the remaining tuition fees for the particular semester.

DETAILS

AMOUNT

Registration Fees

  • Orientation Package (one time) – RM414.00
  • UTP Alumni (one time) – RM50.00

RM464.00

International Students Bond & Personal Deposit (Refundable)

RM3,250.00

Upfront Payment For Academic Fees *

RM2,000.00

TOTAL

RM5,714.00


* Will be deducted from the total academic fees charged for that particular semester

10.

How often do I need to pay the tuition fees and how much do I need to pay each time?

Payment can be made each semester from the beginning of the semester until 2 weeks before the Final Semester Examination. The total tuition fee is based on the number of credit hours registered in the particular semester based on the following calculation:

 

Undergraduate – RM485/credit hour with maximum of 18 credit hours per semester.

11.

Will there be in campus accommodation available?

Yes. Student will be provided with accommodation for their whole education period in UTP.

 


Please click here for Brochure:  Page 1 | Page 2